PicoMite V6.00.02 betas

Author	Message
matherp Guru Joined: 11/12/2012 Location: United Kingdom Posts: 11732	Posted: 07:59am 10 Mar 2025         Quote   Please be aware that the 2350 suffers from a GPIO pin fault. This is a hardware fault, that changes the input impedance if the pin is used as input. This may have impact on the DS18B20 in powered mode, but definitely will impact the behaviour of the DS18B20 when used in slave power mode. Slave power mode works fine on RP2350. I programmed round the E9 issue. Re: a previous comment about the DS18B20 not respecting the resolution - it does However if the actual temperature is 23.5 all resolutions will show 23.5. If the actual temperature is 23.625 then resolutions 0 and 1 will show 23.5 and 2 and 3 will show 23.625. Edited 2025-03-10 19:56 by matherp