Guru
Joined: 08/06/2022
Location: AustriaPosts: 429
| Posted: 11:34am 11 Mar 2025 |
just had a strange effect with b17 on an RP2350 ....
The touchpad with an FT3663 stopped working, dunno exactly when, probably after an upgrade to b16 or b17. Checked wiring and options, all ok.
Anyway, cleared flash with Clear_Flash_RP2350.uf2 ... to no avail. Reflashed from b7 onwards, no cure.
Flashed b17 again and then OPTION TOUCH DISABLE and setting the touch option again as FT3663 and it worked again. So for some reason the Clear_Flash_RP2350.uf2 did not reset the flash completely, some garbage must have been left over which in turn upset the touch option.
So my question: is there any better way to completely wipe the flash on either pico or pico2 then with the Clear_Flash(_RP2350) utlities?
Reagrds,
Gerald