Guru
Joined: 08/06/2022
Location: AustriaPosts: 444
| Posted: 03:14pm 12 Mar 2025 |
@Peter,
just trying to get a touch panel with a FT6336 controller working. TOUCH(x/y) do report valid coordinates. The problem is, that there is no response to TOUCH INTERRUPT and also no resonse to any of the touch sensitive GUI components.
Environment:
PicoMite MMBasic RP2350A Edition V6.00.02b18
OPTION SYSTEM SPI GP2,GP3,GP4
OPTION SYSTEM I2C GP0,GP1
OPTION FLASH SIZE 4194304
OPTION COLOURCODE ON
OPTION CPUSPEED 300000 'KHz
OPTION DISPLAY 45, 132
OPTION LCDPANEL ILI9341, RLANDSCAPE,GP5,GP6,GP7,GP8,INVERT
OPTION GUI CONTROLS 75
OPTION TOUCH FT6336 GP10,GP9,,50
GUI CALIBRATE 1, 314, 6, -10276, 10588
OPTION SDCARD GP11
Regards,
Gerald