Guru
Joined: 08/05/2020
Location: United StatesPosts: 375
| Posted: 08:23pm 10 Mar 2025 |
Tested on Vizio TV and Dell monitor. The box shows fine after auto-adjust.
For some reason if I add the circle after the box (as in your example) the screen is cleared below the cursor position before the circle is drawn leaving just the top portion of the box. If I add the box again, the screen is cleared below the cursor position before the box is drawn leaving just the top portion of the circle.
Note that I am testing on a Pico2 mini using Tera Term as that is the RP2350 that I currently have set up for VGA, thus the non-standard VGA pins.
> option cpuspeed 336000
> box 0,0,mm.hres,mm.vres
> circle mm.hres/2,mm.vres/2,200
> box 0,0,mm.hres,mm.vres
> circle mm.hres/2,mm.vres/2,200
> option list
PicoMiteVGA MMBasic RP2350A Edition V6.00.02b17
OPTION FLASH SIZE 4194304
OPTION KEYBOARD US
OPTION CPUSPEED (KHz) 336000
OPTION DISPLAY 40, 106
OPTION VGA PINS GP4,GP0
> box 0,0,mm.hres,mm.vres
>
Edited 2025-03-11 06:31 by Sasquatch