Senior Member
Joined: 28/01/2023
Location: NetherlandsPosts: 213
| Posted: 12:56pm 26 Mar 2025 |
Peter,
Oled screen is now working normally again. Thanks for this.
The other problem of the firmware crashing in the editor is still the case.
It always occurs when scrolling down with the arrow keys in the program with the editor and can only be fixed with a hard reset.
Test with PicoMite MMBasic RP2040 Edition V6.00.01 it always goes well and with PicoMite MMBasic RP2040 Edition V6.00.02RC7 it always goes wrong.
Program is about 1100 lines long and stops at line 304. Communication with Tera Term is then broken and after a reset there is communication again.
It also happens with PicoMite MMBasic RP2350 Edition V6.00.02RC7.
> option list
PicoMite MMBasic RP2040 Edition V6.00.01
OPTION SYSTEM I2C GP0,GP1
OPTION COLOR CODE ON
OPTION HEARTBEAT OFF
OPTION PICO OFF
OPTION DISPLAY 44, 100
OPTION LCD PANEL SSD1306I2C, RLANDSCAPE
OPTION SDCARD GP5, GP6, GP7, GP4
PicoMite MMBasic RP2040 Edition V6.00.02RC7
Copyright 2011-2025 Geoff Graham
Copyright 2016-2025 Peter Mather
Firmware updated
> option list
PicoMite MMBasic RP2040 Edition V6.00.02RC7
OPTION SYSTEM I2C GP0,GP1
OPTION COLOR CODE ON
OPTION HEARTBEAT OFF
OPTION PICO OFF
OPTION CPU SPEED (KHz) 200000
OPTION DISPLAY 44, 100
OPTION LCD PANEL SSD1306I2C, RLANDSCAPE
OPTION SDCARD GP5, GP6, GP7, GP4
>
Greetings,
Jan.