Guru
Joined: 05/03/2018
Location: NetherlandsPosts: 5616
| Posted: 05:58am 12 Apr 2025 |
Hi stef,
I cannot give you an answer, but I assume the on board 4 port hub is 1 level. connecting one port of it to a second hub is level 2. Maybe the stack cannot support 2 levels. You could test this by disconnecting the on board hub (as if you would do a firmware update) and connecting the 7 port hub directly to the pico,
Also I am pretty sure there will be memory limitations on the total number of ports the pico stack can support.
Volhout