Senior Member
Joined: 25/09/2024
Location: United KingdomPosts: 105
| Posted: 05:08pm 14 Apr 2025 |
The System should be only used for this one purpose, the CMM2 would be too good for it.
I would also like to have the original Surfaces of my Synthesizers as a visual representation on my Touch Panel and control them through it, and to achive that, i need a quite high resolution with a decent colour Depth.
Scaling the Pictures of their Surfaces from 1920x1080 and above down to say 640x480, would destroy most of the Markings on them and scrolling trough Parts of the Surfaces is no option either.
I need every controllable Parameter of one particular Synthesizer at a time visible in one Page and for the "feeling" its original surface, instead of using controls like "modified" Bargauges and LEDs, as i already did with the PM + the small Waveshare-TFT.
The CMM2 could resolve at least Resolution issue, but as said, it would be a shame for me to use it only for this purpose.
Of course, everything could be also done on my PC using things like PureData or Max/MSP, with which i alrady have built some control surfaces and Synthesizers in the past, and virtually connect everything together.
But i'd like to have an external solution, which eventually plays a "Man in the middle"-Role between my PC, running a Sequencer, and my music Equipment, without the need to set up every time again virtual connections on one machine, loading and runnign scripts and so on. I'm using Linux, so its quite different from Windows in terms of available Software and "how to do it".
Edited 2025-04-15 03:10 by stef123