Guru
Joined: 05/10/2019
Location: United KingdomPosts: 8826
| Posted: 10:09am 21 Jun 2025 |
I always save them as separate macros for the Pico. I have Pico macros for both through-hole and SMD and two sets of pin refs, the other is in tiny characters parallel to the sockets. I can then put any pair of macros on and/or leave the pin refs off - or take them off the board when I've finished the layout. Of course, the pad locates the pin refs to pin 1. You can easily delete the pad and leave the refs.