I've now jumped on the PICO2 train...

Author	Message
Grogster Admin Group Joined: 31/12/2012 Location: New Zealand Posts: 9954	Posted: 03:23am 22 Jun 2025         Bleep said   Hi Grogster, I'd just set it to 1.3V & leave it, then all frequency options will be fine, the extra power consumption is negligible, the RP2350 doesn't even get warm. In my case I use 1.25v because I tested the highest frequency & found that was plenty, it started crashing around 1.23v so I set it a reasonable value above that & it seems completely stable, but this would involve individually tuning every one, so 1.3v is fine. Regards Kevin. Excellent, thank you.