Guru
Joined: 28/01/2023
Location: NetherlandsPosts: 416
| Posted: 07:16pm 09 Jul 2025 |
Peter,
I did this. The final result, for the new color input, is quite a challenge, along with the manual.
Is it not entirely accurate, or is the manual incorrect?
It does work.
I use this as a scrolling settings list with an Arduino serial connection(3V3), which works correctly.
The Arduino has a blue 4x20 I2C LCD, hence the colors.
> option list
PicoMite MMBasic RP2040 Edition V6.00.02
OPTION SYSTEM SPI GP10,GP11,GP12
OPTION SYSTEM I2C GP20,GP21
OPTION AUTORUN ON
OPTION COLOURCODE ON
OPTION DEFAULT COLOURS WHITE, BLUE
OPTION CPUSPEED (KHz) 200000
OPTION SDCARD GP19
> OPTION LCDPANEL ILI9341, P,GP13,GP14,GP15,GP9
> option lcdpanel console
> option list
PicoMite MMBasic RP2040 Edition V6.00.02
OPTION SYSTEM SPI GP10,GP11,GP12
OPTION SYSTEM I2C GP20,GP21
OPTION AUTORUN ON
OPTION COLOURCODE ON
OPTION CPUSPEED (KHz) 200000
OPTION LCDPANEL CONSOLE
OPTION DISPLAY 26, 30
OPTION LCDPANEL ILI9341, PORTRAIT,GP13,GP14,GP15,GP9
OPTION SDCARD GP19
option lcdpanel console 1,rgb(white),rgb(blue),99
> option list
PicoMite MMBasic RP2040 Edition V6.00.02
OPTION SYSTEM SPI GP10,GP11,GP12
OPTION SYSTEM I2C GP20,GP21
OPTION AUTORUN ON
OPTION COLOURCODE ON
OPTION DEFAULT COLOURS WHITE, BLUE
OPTION CPUSPEED (KHz) 200000
OPTION LCDPANEL CONSOLE ,,, FF, 99
OPTION DISPLAY 26, 30
OPTION LCDPANEL ILI9341, PORTRAIT,GP13,GP14,GP15,GP9
OPTION SDCARD GP19
Regards,
Jan.