javavi
 Guru
 Joined: 01/10/2023 Location: UkrainePosts: 632 |
| Posted: 12:56pm 03 Jul 2025 |
|
|
|
@Amnesie I think it is necessary to reserve one port from GP0, GP8 for selecting the PMRAM chip. At the moment, an additional PMRAM chip can be easily soldered on the second floor over the flash chip on Chinese clones of Pico 2 RP2350. For example, I run PicoMite HDMI on a murmulator board with an installed Chinese clone of Pico 2 from WeAkt with a soldered PMRAM over the flash chip. Also on this board, both video outputs HDMI and VGA are connected in parallel to choose from, and it is surprising that one does not interfere with the other at all. Also, three ports are allocated for sound, which allows you to connect an I2S DAC or use PWM to choose from. Here is a block diagram as an example of port distribution:
 Edited 2025-07-03 22:57 by javavi |