Senior Member
Joined: 30/10/2014
Location: GermanyPosts: 274
| Posted: 07:23am 03 Oct 2025 |
Hi,
I am looking for the most current reference design for the HDMI version of the Pico 2 board - is it the one that was advertised in the SC article this Spring (Pico 2 Computer) and is linked on their website? If not, could someone please point me to the thread here?
Another question: I uploaded the files from SC to JLCPCB and one part is not available, the 4.7 mH inductor. They have an inductor with similar specs except that it is 45 Ohm instead of 32 Ohm - would that be acceptable?
Many thanks and best
Thomas
Guru
Joined: 11/12/2012
Location: United KingdomPosts: 10557
| Posted: 07:43am 03 Oct 2025 |
Is this the version that uses a Pico2? The latest version uses an on board RP2350 and has I2S audio so doesn't use those inductors
Senior Member
Joined: 30/10/2014
Location: GermanyPosts: 274
| Posted: 07:56am 03 Oct 2025 |
Its in the .zip ("Pico 2 Computer PCB.zip") on this page:
https://www.siliconchip.com.au/Shop/10/1841
Guru
Joined: 11/02/2018
Location: AustraliaPosts: 2809
| Posted: 08:02am 03 Oct 2025 |
As it has a 220Ω resistor in series I doubt it will make much difference.
Volhout will let you know if this is wrong.
The SC article is in April 2025, Pico 2 Computer, but so far can't find the TBS thread.
Senior Member
Joined: 30/10/2014
Location: GermanyPosts: 274
| Posted: 08:10am 03 Oct 2025 |
Can you please point me at the thread with the latest version? Thanks!
Guru
Joined: 11/12/2012
Location: United KingdomPosts: 10557
| Posted: 08:19am 03 Oct 2025 |
https://www.thebackshed.com/forum/ViewTopic.php?TID=17301&P=11
Senior Member
Joined: 30/10/2014
Location: GermanyPosts: 274
| Posted: 08:36am 03 Oct 2025 |
Thanks Peter!