Guru
Joined: 26/09/2020
Location: AustraliaPosts: 657
| Posted: 08:23pm 19 Mar 2026 |
Hi Aaron, I have a clamp meter, I don't think it does instantaneous measurements, but I do have an old analog one that I can check the inrush current with.
I will have a look at what the motor is drawing.
Good to know that you have used the drill method, I also have an air gun that I could use, so may try that as it has heaps more torque.
The motor on the splitter is a 2 pole jobby too, 2800rpm.
I have to go to town today but will play about this afternoon and see if I can get some measurements.
cheers
Pete