Guru
Joined: 22/02/2006
Location: AustraliaPosts: 2082
| Posted: 04:52am 05 May 2026 |
Well that was interesting just upgraded the firmware to B5 and the LCD booted up in serial mode
PicoMite MMBasic RP2350B V6.03.00B5
Copyright 2011-2026 Geoff Graham
Copyright 2016-2026 Peter Mather
Firmware updated
> option list
PicoMite MMBasic RP2350B V6.03.00B5
OPTION SYSTEM SPI GP2,GP3,GP4
OPTION FLASH SIZE 16777216
OPTION COLOURCODE ON
OPTION PICO OFF
OPTION CPUSPEED (KHz) 200000
OPTION LCDPANEL CONSOLE
OPTION DISPLAY 26, 60
OPTION LCDPANEL ILI9488, LANDSCAPE,GP5,GP6,GP7,GP1
OPTION GUI CONTROLS 75
OPTION TOUCH GP10,GP11
GUI CALIBRATE 0, 3944, 3813, -1288, -876
OPTION SDCARD GP12
Copyright 2011-2026 Geoff Graham
Copyright 2016-2026 Peter Mather
Firmware updated
> option list
PicoMite MMBasic RP2350B V6.03.00B5
OPTION SYSTEM SPI GP2,GP3,GP4
OPTION FLASH SIZE 16777216
OPTION COLOURCODE ON
OPTION PICO OFF
OPTION CPUSPEED (KHz) 200000
OPTION LCDPANEL CONSOLE
OPTION DISPLAY 26, 60
OPTION LCDPANEL ILI9488, LANDSCAPE,GP5,GP6,GP7,GP1
OPTION GUI CONTROLS 75
OPTION TOUCH GP10,GP11
GUI CALIBRATE 0, 3944, 3813, -1288, -876
OPTION SDCARD GP12
Well that sure did save having to put all the options back in or should I have done a clear flash first? Also just tried run and sure enough my program loaded
Edited 2026-05-05 14:54 by Bryan1