Guru
Joined: 22/02/2006
Location: AustraliaPosts: 2070
| Posted: 02:24am 15 May 2026 |
Talking with this guy last night and he said he has a couple of Pruis electric cars at home and he wants to see if they can be used.
So did a bit of research this morning and read a snapon pdf on the pruis battery, they are 2 cells @7.2 volts in series to make a 14.4 volt pack and there are 14 of these to make a 200 volt output.
Now these packs are connected by small copper bussbars so re-configuring each pack into 4 packs will give a 48 volts setup.
So yes this is going to be an interesting afternoon.
Regards Bryan