MMBasic ANSI - MMBasic on Mac/Windows/Linux in a terminal

Author	Message
ville56 Guru Joined: 08/06/2022 Location: Austria Posts: 560	Posted: 02:51pm 08 Jun 2026         jvanderberg said   Not sure, I just followed the instructions from my readme and successfully flashed https://github.com/jvanderberg/PicoMiteAllVersions/releases/download/latest/MMBasic-Anywhere-esp32-s3-merged.bin What board do you have? this is the chip info from the download tool: Chip is ESP32-S3 (QFN56) (revision v0.2) Features: Wi-Fi, BT 5 (LE), Dual Core + LP Core, 240MHz, Embedded PSRAM 8MB (AP_3v3) Crystal is 40MHz MAC: fc012ccc6fd0 Manufacturer: 68 Device: 4018 Status value: 0x600200 Detected flash size: 16MB a press of the reset button gives the message posted in the previous link, a power cycle after flashing leads to the following message on the console port in a loop: ESP-ROM:esp32s3-20210327 Build:Mar 27 2021 rst:0x7 (TG0WDT_SYS_RST),boot:0x8 (SPI_FAST_FLASH_BOOT) Saved PC:0x400454d5 SPIWP:0xee mode:QIO, clock div:2 load:0x3fce2810,len:0x178c ets_loader.c 78