MMBASIC, Explore 100, Picomite graphics display

Author	Message
robert.rozee Guru Joined: 31/12/2012 Location: New Zealand Posts: 2541	Posted: 07:57am 30 May 2026       i believe that some years back there were one or two forum members doing almost exactly what you describe - they were using an MX170 an an I/O expander that accepted  text commands to control pin states, set up PWM signals, query switch states, etc. i can't be 100% sure, but i also think some were doing the same for graphics commands to draw on an attached LCD screen - this was before the days of driving VGA or DVI. Geoff and others who were around back then may remember better than me. cheers, rob   :-) Edited 2026-05-30 17:57 by robert.rozee