Senior Member
Joined: 25/07/2019
Location: United StatesPosts: 119
| Posted: 07:31am 31 May 2026 |
Ok checked it out... After reset, the CON6 serial port is TTL and running at 38.4K. Acts as the console. The pins are 5V tolerant but output is 3.3. So it seems most of my problems are solved. At least I can try a proof of concept with the Explore 100.
The PICO 2 TX/RX pins are not 5V tolerant so I need level shifters, at least inward and I need to test an actual board as proof of concept.