Guru
Joined: 09/09/2009
Location: AustraliaPosts: 2333
| Posted: 02:02pm 05 Jan 2011 |
Bit curious of what voltage mill you are making Trev, as 100 turns per coil dont work out to me.
That would be close to the total of 3 coils in series, not per coil, if it was a 24 volt system.
Or do you intend to wire the coils in parallel groups of 3.??
Sorry but feel you have a mistake here unless you are going for a higher than average voltage.
Pete.
Sometimes it just works