White Pointer AXFX

Author	Message
niall1 Senior Member Joined: 20/11/2008 Location: Ireland Posts: 331	Posted: 11:22pm 05 Jan 2011       hi Trev thanks for sharing your work , these centrally mounted stators are very different to what we,er used to over here so its very interesting to see one being fleshed out you mentioned you would have liked to have a slightly lower cut in your design... i wonder if by the conversion to dc through rectification you might gain this extra voltage anyway it should increase the v output by a factor of about 1.7 , possibly slightly more with wave peaks those magnets would scare me a lot ....well done ... ps ...i looked up Hughs specs on his 3m machine ,its a 12/9 format as well he uses 110 turns of 1.6 for the 48v stator with a cut in of 167 rpm , i know its a very different machine though (smaller block neos 46/30/10mm , different prop etc) so the comparison isnt really so relevant Edited by niall1 2011-01-07 niall