The Maximite

Author	Message
Geoffg Guru Joined: 06/06/2011 Location: Australia Posts: 3364	Posted: 12:09am 08 Jun 2011         Talbit said   I recon there is an error in the circuit for the 16 * 2 LCD display. Line 10160 has it right - pins 13 to 16 are D4 to D7 but the circuit is the wrong way around. The program seems to support line 10160. Yes, you are right - pin 13 goes to D4, 14 to D5, etc. Thanks for the advice and I will fix the documentation ASAP Geoff Geoff Graham - http://geoffg.net