Guru
Joined: 23/03/2007
Location: RomaniaPosts: 1697
| Posted: 08:31am 11 Apr 2011 |
Hi cindy,
You checked to see if that magnet is able to turn on your reed switch? Your reed switch is in the right position? Your wires are ok?
You wrote the program inside the PICAXE, or it was delivered with the software in place? You tested the Piclog with the last software available on Glenn site?
Your Piclog is able to read input voltage values?
Vasi
Hobbit name: Togo Toadfoot of Frogmorton
Elvish name: Mablung Miriel
Beyound Arduino Lang