Newbie
Joined: 09/06/2011
Location: Posts: 25
| Posted: 01:19pm 30 Jun 2011 |
Thanks for the answers. I was running the Maximite on a small pcb, no video, no ps2. As I ran the basic, my feeling was the basic is a little bit "slow" - maybe because of video running in the background. I compared it with StickOs basic.
BTW, the chip can run 80MHz cpu AND 80MHz peripheral bus as the default
(this is not an overclocking of the PeriphBus!), my chip runs 120MHz cpu and 120MHz peripheral bus stable. Of course, 2 wait states only. You will achieve an 1.51x speed increase then. Maybe running Periphbus @80MHz (instead of yours 40MHz) may enable better video resolution/functionality then. Also the peripherals may run faster as well. The video stuff may need an adjustment, of course. P.