Maximite equivalent hardware?


Author Message
aargee
Senior Member

Joined: 21/08/2008
Location: Australia
Posts: 255
Posted: 10:40am 16 Jun 2011      

I'm assuming Geoff is now off in the boondocks away from this maddening crowd! ;-)

So any insights on the following from anyone?

I've got hold of the Bit Whacker board in the post above. Playing around a bit. Firstly Geoff's bootloader doesn't see it as 'working properly'. The bootloader that's meant for this board does see it and is quite happy to load a hex file and feed it to the PIC.

This is where I'm hesitating. Can/should I just feed it the Maximite hex file and all will be well? After I build all the other hardware onto the board, i.e. Video/keyboard/etc, will I effectively have a Maximite?

I don't have a PicKit3, which would be the ideal way to go, i.e. put Geoff's bootloader onto the board.

Thanks in advance for any suggestions.

- Rob.