Maximite equivalent hardware?

Author	Message
donmck Guru Joined: 09/06/2011 Location: Australia Posts: 1314	Posted: 07:19pm 21 Jun 2011         aargee said   OK, I won't have any time to play for the next few weeks, here's what I've done... Maximite into UBW32 Good luck, - Rob. Great work. Rob, thanks for the write up you have done. I currently have 23 of these boards in stock. They may even be cheaper than the one you got. http://www.dontronics-shop.com/usb-32-bit-whacker-pic32mx795 -development-board.html It is a great way of getting a Maximite system going if you are that keen. At least you can develop software, but you will need to fiddle the hardware to make it into a Maximite. In conjunction with Richard @ tctec, we will have a mini-Maximite. I only saw the first artwork draft for it last night, so I figure it may be a month or two before it sees the light of day. I always try and to over estimate on these matters, as I have seen years of spin from other companies, where I have been the one waiting. This will have the 26 pin peripheral header position, and headers for other Maximite control I/O, so basically it will be the same as a maxi, but no kbd, or vga out the back. Oh, it will have a microSD card. Cheers Don... https://www.dontronics.com