Senior Member
Joined: 15/06/2011
Location: AustraliaPosts: 819
| Posted: 02:02pm 16 Jun 2011 |
what i am attemptin to do with my"maxi"
log data as volts from six batterys "given i am running a 36 volt system" 6 times 225 ah trojan t105 plus batterys in series //ok now i have sent and paid for a maxi from "hamfield" today i can run a loom to the batterys since the dc path only reaches about 4-5 meters ok ..um some may be fimialar with the "ETI326 kit" exp scale volt meter i had built six of them from scratch ..and wasrunning them in bar mode to "assatain every battery voltage ..now given that fact it was draining the batterys only by a little but still a drain...i want to be able to read every battery on the screen in a little graph or even a line out with its voltage ..aside from that i also want too read current comming in from my panels which is prolly to high "40 volts" for the maxi to cope with ok...
well today i ordered a maxi and io card expander from hamfield...and paid for it as well ..dont know if i have thrown away 160 bucks there .. but if it does arrive i will be happy to be able to get it built...so that is basically what i want ..from the maxi aside from a pulse generator but i have got that in the works my self ... thanks to all on the web for even trying to under stand me and thanks to those who may have any ideas on this topic..regards sparkey....
technicians do it with least resistance