New to Maximite

Author	Message
sparkey Senior Member Joined: 15/06/2011 Location: Australia Posts: 819	Posted: 09:13am 25 Jun 2011       well as long as you have the cable pin tto pi it really does not matter what side the red stripe is on as long as it is electrically tru you should be ok ...now the other thing is that i used a straight headder on the maxi board it needs to be turned around if you have not dune this and you have the right angle hedder onit you may have to cut a slot in the plastic ...givern this is what i found with my kit it came from altronics... technicians do it with least resistance