Connecting my first cable

Author Message
James_From_Canb

Senior Member

Joined: 19/06/2011
Location: Australia
Posts: 265
Posted: 09:25am 25 Jun 2011      

So if I use setpin n,8 and pin(n) = 1, I should expect to see 3.3V between pin n and a grounded pin?

Any yes, I meant 0V, not nothing.
------------------------

Problem Solved: The crimping hadn't connected all the wires in the ribbon cable.
Pin 1 now outputs 3.25 volts.

Thanks for your help. Edited by James_From_Canb 2011-06-26