analog pin not stable for reference

Author	Message
Gizmo Admin Group Joined: 05/06/2004 Location: Australia Posts: 5186	Posted: 08:10am 28 Jun 2011       Hi Sparky You might need to add a capacitor across the pin to settle it down a bit. Try a 1uF or 10uF cap. Erratic analogue inputs are a common problem, but there is usually a solution, you need to find the right combination of caps, resistors and software to give the results you expect. How much is it jumping around, what are the voltage extremes, millivolts or volts. Glenn The best time to plant a tree was twenty years ago, the second best time is right now. JAQ