Senior Member
Joined: 17/10/2011
Location: United StatesPosts: 187
| Posted: 10:12am 21 Dec 2011 |
Well, I read the SM1 manual, duh. I guess I'll need to use a VGA to composite converter for NTSC composites like we have in the states. PAL is not likely to work for me unless the little TFT screens have both PAL & NTSC built in.
The good news is I already drafted a sample screen layout in VGA using font 2. The other bit of good news is I already have a couple VGA to composite converters. Now I only need the 3.5 & 4.3 inch TFT screens to arrive.
Does anyone happen to know if it is common for these little TFT composite "back-up monitors" to come with the ability to work on both systems, PAL and NTSC? There are no specs listed to this point in the auction listings for the two I ordered.
We're all here 'cause we're not all there.