Newbie
Joined: 26/12/2011
Location: United StatesPosts: 5
| Posted: 05:06pm 28 Dec 2011 |
hi bob. cheers this is what i was thinking. i know its small but the miele pump is $1,045 brand new and the motor itself is 120v compared to uk-euro. i was revbuiding it with new rubber hosing etc. but the rotor was damged in the processs.
3m have an epxoy so ill try this method you suggest.
Thank you for contacting 3M, the Innovation Company. We have some epoxies that may be suitable for your application.
DP-460 is a two-part, room temperature curing epoxy. It has a 60 minute worklife and reaches handling strength in 4 hours. It comes in a cartridge and is dispensed through a hand-held applicator.
If you only need a small quantity of adhesive and don't want to invest in an applicator, you may want to try Scotch Weld 2216 Gray. This is another two-part, room temperature curing epoxy. It has a 90 minute worklife and reaches handling strength in 10 hours. It comes in a variety of bulk sizes, such as a two ounce tube kit. This product is mixed by hand.
The technical data sheets are attached. If you have any questions, please let me know.
Regards,
Barb S.
3M Customer Contact Center
Product and Application Support
Industrial Business
We value your feedback on this email response experience. Please take a moment to complete these 5 questions. Your responses will let us know whether we are serving you well and how we may improve. Thank you for your continued support of 3M.
Click the link to complete a 5 question survey https://www4.3m.com/Groups/Irs/IrsSur.nsf/sd?Open&BU=9627370 32333XXBU6&ID=24162726023536869627F6F6XXID12
- If there is a need to reply to this response, please leave the subject line intact to assure correct routing. -