Newbie
Joined: 19/12/2011
Location: AustraliaPosts: 8
| Posted: 04:42am 27 Feb 2012 |
I AM HAVING NIL RESULTS WHEN USING UBW32 INSTEAD OF MY MAXIMITE
I AM USING OUTPUT TAGS 12 AND 13, ON UBW32 BOARD THEY ARE D9 AND D10 RESPECTIVELY
THE SAME PROGRAM AS IN THE MAXIMITE LISTED BELOW
5 DIM PORT
10 I2CEN 100,100
20 I2CSEND 32,0,1,&hff
30 ? "MM.I2C after send: "; MM.I2C
40 I2CRCV 32,0,1,port
50 ? "MM.I2C after recv: "; MM.I2C;", Data from port: ";HEX$(port)
60 I2CDIS
70 END
THE RESULTS ARE
MM.I2C after send: 2
MM.I2C after recv: 2 , Data from port: 0
WHICH IS THE SAME AS NIL CONNECTION
HAVE TESTED O/P 12 TO SDA AND O/P 13 TO SCL
THANKS
SAC