Senior Member
Joined: 20/11/2011
Location: FrancePosts: 240
| Posted: 04:13pm 27 Feb 2012 |
Hi ,
Cool to see that I'm not the only one who cant achieve to made a I2C communication
with the UBW32.
I'm 100% sure that all pin used are working because i have use them to
connect my joystick who work perfect
After trying with 3 different nunchuk and with no result i just keep that
on side up it work
I tested the SDA/SCL pins on the oscilloscope and no signals are coming out.
The 2 pins have a resistor to 3.3v as pull-up , i tried from 2.7 to 10K.
It will be good if it work , so all next games can use nunchuk instead of a
buttons based joystick.
Cheers.
Theory is when we know everything but nothing work ...
Practice is when everything work but no one know why ;)