PULSE problems on UBW32

Author Message
Dave Everett
Regular Member

Joined: 24/06/2011
Location: Australia
Posts: 43
Posted: 04:47am 21 Mar 2012      

I have MM3.1 loaded onto a UBW32 and have been testing the PULSE command and found it varies greatly.

I am using pin 20 for all my tests and a Saleae
logic analyser to measure the pulses.

Pulse 20,2 gives varying pulse widths anywhere from 1ms to 1.5ms.

If someone else has a UBW32, could they check and see if they are getting similar variability.

Thanks,
Dave