ajkw Senior Member
 Joined: 29/06/2011 Location: AustraliaPosts: 290 |
Posted: 12:47am 11 Dec 2012 |
|
|
|
Nick,
From what I have been led to believe the CMM only reads from the RTC on boot and can only be set with the TIME$ command. I do not believe the i2ctime program will be able to communicate with the RTC on PIC32 pins RA2 and RA3. If I am not mistaken the i2c commands will only try communicate with a device on Pins 12&13.
Anthony. |