brucedownunder2 Guru
 Joined: 14/09/2005 Location: AustraliaPosts: 1548 |
| Posted: 01:16pm 10 Aug 2013 |
|
|
|
OK,, this type of "relay" is similar to your most common relays ,except that it's purpose is to switch from one coaxial center conductor to an adjacent coaxial center conductor, A coaxial cable most commonly has an outer ,called the shield, and a center conductor ,which carries the signal.
If we have two antennas, and want to use only one at a time then we still require seperate coaxial feeds . This is where the coaxial switch plays it's part ,,switching the signal to either one or the other.
All voltages are used for the relay coil .
Bruce Bushboy |