Guru
Joined: 15/07/2006
Location: AustraliaPosts: 640
| Posted: 01:25am 11 Aug 2013 |
Pictures of fitting the batteries.
All are handled one at a time. Cells are clamped together using 6mm stainless steel threaded rod, 3 on each side. The font of the box is used as one end plate and the back end plate 3mm alloy checker plate with the top and bottom 10mm folded for stiffening. The centre end plate, is one plate, right across both centre rows of cells. So cells are clamped to the front of the box and down through the steel rails underneath. The cells cannot move.
Trev @ drivebynature.com