uM2(+): data logging - cheap fast & easy


Author Message
CaptainBoing

Guru

Joined: 07/09/2016
Location: United Kingdom
Posts: 2171
Posted: 10:12am 05 Oct 2018      

  matherp said   This one I'm pleased with

Since playing with the ESP8266 I've been interested in exploring how Serial Flash memory chips could be used for secure data logging on the Micromite as an alternative to SDcards or an external device like an Openlog.

Good morning Peter. you are well I trust.

What are the chances of revisitng this and placing the functions int he ARM Mite (and MMX) firmware? These are mega-useful chips confined to the '170 (and 470?) platform.

The ARM Mite definitely is a big controller but has only SDCard support.

just a thought

all the best

h

CaptainBoing

Guru

Joined: 07/09/2016
Location: United Kingdom
Posts: 2171
Posted: 03:17pm 24 Nov 2019      

Afternoon all.

Just a note to say there is a code-pack for Reading/Writing Winbond flash memories now in the library here

This is a pure MMBasic solution (no CSubs/CFunctions) so MMX and ArmMite users can now enjoy these fantastic little chips. The code has been tested on 4 and 8MB devices and I will check other chips as they arrive (16MB on order)

enjoy

lizby
Guru

Joined: 17/05/2016
Location: United States
Posts: 3886
Posted: 03:35pm 24 Nov 2019      

Thanks for this powerful addition to mmbasic storage options, and thanks for making it work across chip families.

Your work with the library is much appreciated. When I'm looking for a new solution, I've learned to browse the library first if a forum search doesn't satisfy.
PicoMite, Armmite F4, SensorKits, MMBasic Hardware, Games, etc. on FOTS

CaptainBoing

Guru

Joined: 07/09/2016
Location: United Kingdom
Posts: 2171
Posted: 06:31pm 24 Nov 2019      

welcome.

Blame BigMick  

TrevorH
Senior Member

Joined: 06/04/2018
Location: United Kingdom
Posts: 145
Posted: 05:22pm 13 May 2020      

Hi,

Is there away to access the Flash memory chips on SPI2 on an E100 when the Touch is enabled?

I can access it when Touch not enabled but with Touch enabled SPI2 error is "Not Open".

uncommenting "SPI2 Open 10000000,0,8" error is "SPI2 is in use".  

We can still use SD card with Touch.  

TrevorH

matherp
Guru

Joined: 11/12/2012
Location: United Kingdom
Posts: 12129
Posted: 05:36pm 13 May 2020      

  Quote  Is there away to access the Flash memory chips on SPI2 on an E100 when the Touch is enabled?


No sorry - see top of page 11 in the MM+ manual