Guru
Joined: 02/02/2017
Location: AustraliaPosts: 1432
| Posted: 06:35am 12 Feb 2021 |
Hi Angelo
I've just got back from work where I had to make a $100,000 AU machine work
after one of it's 2 CPU Z80 based control boards died. Or die trying.
This most recent post is about 15 times more complex than I can deal with right now.
My first thoughts are that you can substitute the EG8010 control modules
with a nanoverter. Just make a cable that takes the 10 pin IDC socket and goes to the
15 pin or whatever 0.1 inch header. It's all electrically compatible.
So that is one experiment: compare and contrast the EG8010 and the nanoverter.
I will help with how you do this, I think it's worthwhile.
But maybe tomorrow I will read the above and hopefully bring some extra value to
the conversation.