Tinker
![](uploads/Tinker/2009-08-12_235147_charlotte_avatar.jpg) Guru
![](forum_images/4_star_rating.gif) Joined: 07/11/2007 Location: AustraliaPosts: 1904 |
Posted: 09:54am 15 Apr 2018 |
|
|
|
I recently sold my old 1.8KW Latronics LF inverter (it was 24V version) but before the buyer came I looked at its waveform with my little kit oscilloscope and a 1200W load (fan heater) on the inverter.
Its output was pretty wobbly, a fair bit worse than the output of my home built 3KW inverter with the same load. My inverter showed little difference from the idle wave form, which I think is pretty good.
So, this commercial unit is not perfect either. Klaus |