TheBackShed.com

Forum Index : Solar : Prediction of solar PV output for day(s) ahead.

Author

Message

Andrew_G
Guru

Joined: 18/10/2016
Location: Australia
Posts: 877

Posted: 10:49pm 17 May 2026

Copy link to clipboard

Print this post

G'day,
I'm seeking views on the prediction of solar PV output for day(s) ahead.
(I'm new to this section of TBS, I normally lurk on the Microcontroller and PC projects section.)

We have had a new solar system for a few months (14kW of panels, 8kW inverter, 16.6 kWh battery).
Last night was the first time we dropped to minimum SoC (set at 15%) and we had to import a fair bit of power.
At sunset we only had 90% in the battery - I could have held back on some consumption.
That prompted me to Google sites that helped predict solar output based on weather forecasts.
The one that caught my eye was 'OpenWeather'. I already use it for weather (current and forecast) as it outputs in JSON - which I can use via my Webmite.

Do any of you have any comments or suggestions?

Cheers,

Andrew

Revlac

Guru

Joined: 31/12/2016
Location: Australia
Posts: 1257

Posted: 12:59am 18 May 2026

Copy link to clipboard

Print this post

I did see https://forecast.solar/ but I think you have one that is probably better, however I don't think this is the total solution for this weather situation, your overnight consumption is high compared to your storage and production,

back later.

Cheers Aaron
Off The Grid

KeepIS

Guru

Joined: 13/10/2014
Location: Australia
Posts: 2139

Posted: 01:46am 18 May 2026

Copy link to clipboard

Print this post

This might get confusing with a post in both Solar and Micro forums.

You likely know that Windy.com has a solar Power index map layer, I believe you can pull data, I normally know how we will go by looking at predicated cloud cover.

I have 11kW of panels running at the moment, most are Flat, some South and East facing, only 8 are facing north, in South-East QLD.

With my panel configuration I keep single panel shading effects to a minimum and the flat and south panels are very effective in overcast rainy weather, where slope and direction are meaningless.

There are 7 solar chargers, one for each 4 panel array, it's raining and completely overcast today, currently solar index indicates 130W/m2, each solar array and charger are producing exactly 3.7A, South, North, East and Flat.

7 x 3.7A = 25.9A @ 53.2v = 1.38kW.

The solar index level indicator is real time tracking with the movable readout flag over my location. It's cycling between 92W/m2 and 296W/m2. Power is dropping to 700W under darker cloud cover with heavy rain.

I have over twice the battery capacity you have, and with the rain yesterday we are down to 64% SOC (Full electric home and workshop) another day of no real solar and we will be down to around 34%, it looks like the following day (WED) will be brighter with some lighter cloud cover, that should easily get us back to around 70% SOC. We have not used Mains for over a year.

I assume you have LiFePO4 batteries and are in a Southern state.

NANO:Inverter V 8.2ks - Linux AvrDude GUI script V4.1

Andrew_G
Guru

Joined: 18/10/2016
Location: Australia
Posts: 877

Posted: 04:16am 18 May 2026

Copy link to clipboard

Print this post

Hi Mike and Aaron,
Thanks for your replies.
I'm a complete novice on the solar front but have been playing with MMBasic for 10 years.
I posted to both forums as I assumed some shedders would have an interest in one field.
I know I hadn't been looking at the other forums.

We are 5k east of Melbourne, are fully electric with no gas. The house is to Passivhaus standards (heavily insulated, triple glazed and a heat recovery system).
It has a 'tin' roof, at 15deg facing north. All the unshaded roof has PV panels with micro-inverters. Yes it is a LiFePO4 battery (BYD).
With a full battery at sunset we typically dip to 40% and by playing with the the pool equipment get it back to 100% each day (except yesterday). We are not exporting yet.

I'll go looking at Windy.com.

Cheers,

Andrew

TassyJim

Guru

Joined: 07/08/2011
Location: Australia
Posts: 6528

Posted: 04:45am 18 May 2026

Copy link to clipboard

Print this post

I just did a test with the site Aaron referred to.
It gave good realistic readings for today (mostly sunny)
at 10am their 1315W compared to my 1295W

I suggest trying the public api for a few weeks to see how it compares with actual before getting to involved.
https://doc.forecast.solar/api:estimate

Jim

VK7JH
MMedit

Print this page

To reply to this topic, you need to log in.