Home
JAQForum Ver 20.06
Log In or Join  
Active Topics
Local Time 17:35 29 Mar 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Solar : 24v battery bank balanced wire connectoins 4 or 5 link?

Author Message
rgormley
Senior Member

Joined: 22/02/2006
Location: Australia
Posts: 245
Posted: 02:35am 14 Nov 2022
Copy link to clipboard 
Print this post

i have 4 X 12 volt 200AH batts
wired in series / parallel  (35mm square cable)  to make 24v

i have seen two ways to wire them, one with 4 links and one with 5 links
i currently have the 5 link connections.

so the question is.... what connection method is better? 4 or 5 links

See attached photo (refer to the top setup or bottom setup)



Edited 2022-11-14 12:36 by rgormley
 
pd--
Senior Member

Joined: 11/12/2020
Location: Australia
Posts: 122
Posted: 02:48am 14 Nov 2022
Copy link to clipboard 
Print this post

The four link method , current only needs to travel through two links.
in the 5 link method current needs to pass through three links
This assumes that all links are the same length
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024