Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 15:35 02 May 2025 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Price Watch : Big chokes 31 bucks

Author Message
BenandAmber
Guru

Joined: 16/02/2019
Location: United States
Posts: 961
Posted: 02:02am 06 May 2019
Copy link to clipboard 
Print this post




This is not my ad

I bought some capacitors off this guy

now I'm buying a couple of these to make a bigger choke for my 10000 watt China board and the other one for the power Jack

This guy bought out a inverter company that went under so all these parts were originally bought for inverters

Oh yeah and since I bought two of them he sold them to me a little bit cheaper 41 bucks for two of them


I'm not sure if these are ferrite or not they're kind of heavy

Not laminated definitely ferrite








He has a lot of other miscellaneous inverter Parts also that he sells on eBayEdited by BenandAmber 2019-05-17
be warned i am good parrot but Dumber than a box of rocks
 
Warpspeed
Guru

Joined: 09/08/2007
Location: Australia
Posts: 4406
Posted: 06:25am 06 Mar 2020
Copy link to clipboard 
Print this post

There is enough information there to reverse engineer that.

Green/yellow core looks like Micrometals powdered iron mix 40.

Part number T520-40D which is the largest size available. 5.2" OD, 3.08" ID, height 1.6"

Published Al value 240nH for one turn.  Fifty one turns 51 x 51 x .24uH = 624uH which is pretty close to what you measured.
It very likely has 50 turns.

Looking at the magnetization curve, it has a very soft saturation characteristic.
At 100 Orsteads about 40% of initial permeability.
That works out to 40% of 624uH = 250uH at 52 amps.

At 200 Orsteads about 22% of 624uH = 55uH at 104 amps.

All very nice, and pretty fair value for $31 US dollars.
That's about roughly $50 Aussie bux.

Nice find Ben.
Cheers,  Tony.
 
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2025