Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.
Hi, I recently built the solar mppt charge controller by silicon chip. I am testing it with a 20 watt panel and my 90ah geltec battery. I would like to get an 120 watt panel to make full use of it. I have seen a few on eBay but I wouldn't know if they were any good or not. The controller works quite well although the set voltages need adjusting for a gel battery. I am also thinking of programming a new chip with the correct settings. Any panel recommendations?
Grogster Admin Group Joined: 31/12/2012 Location: New ZealandPosts: 9797
Posted: 02:19am 25 Nov 2017
Copy link to clipboard
Print this post
Welcome to the forums.
Personally, I would keep my distance from the eBay panels, as they are more likely then not, Chinese fake ones not capable of anything like the output they claim to be able to do.
Just my 2c.Smoke makes things work. When the smoke gets out, it stops!