TheBackShed.com

Home	JAQForum Ver 24.01
Log In or Join
Active Topics
Local Time 00:55 11 Nov 2025	Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : pic32 portspeed.

Author

Message

plasma
Guru

Joined: 08/04/2012
Location: Germany
Posts: 437

Posted: 05:31pm 11 Feb 2018

Copy link to clipboard

Print this post

Hi ,

i need a info about the Portspeed for pic32 mx and pic32 mz.
how many pulses can it produce in full speed , in mmbasic and maybe in c or asm.
i have no chance to test this at the moment so i ask here for help.

thx

panky

Guru

Joined: 02/10/2012
Location: Australia
Posts: 1116

Posted: 05:14am 12 Feb 2018

Copy link to clipboard

Print this post

@plasma

Using a PIC32MX170 at 40MHz, the MMBasic Manual says using the PULSE command your can generate pulses a minimum of 5uS in MMBasic.

Extrapolate out to a PIC32MX470 running at 120MHz, you should be able to get down to somewhere around 2uS or a bit less Going to a PIC32MZ at 252Mhz should allow you to get down to something a bit less than 1uS.

No idea what C or Assembler could achieve but at 1 instruction per machine cycle, the MZ chip at 252MHz should be able to get down to something approaching 10nS pulses - this is entirely supposition

panky

... almost all of the Maximites, the MicromMites, the MM Extremes, the ArmMites, the PicoMite and loving it!

Print this page

To reply to this topic, you need to log in.