 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Serial Port Monitor for the Notificatio
| Author | Message | ||||
| paceman Guru  Joined: 07/10/2011 Location: AustraliaPosts: 1329 |
Here's a handy little utility that's recently been put up: Serial Port Monitor It could save a bit of the annoyance factor each time you plug in a USB connector to a Windows system if you don't already know the COM port you're dealing with. The COM number just pops up on the notification bar without you having to dig down into Device Manager and you can also set up various programs to use it with, e.g.Putty, TeraTerm etc. accessed via a single right click. Greg |
||||
CaptainBoing Guru Joined: 07/09/2016 Location: United KingdomPosts: 2171 |
Nice one Greg I have a short cut to device manager on my desktop so i can see what com port the USB jobby has come up as (this time). I think this will be more convenient. I will give it a drive and see. cheers h |
||||
| lizby Guru Joined: 17/05/2016 Location: United StatesPosts: 3470 |
Installed and working--thanks. PicoMite, Armmite F4, SensorKits, MMBasic Hardware, Games, etc. on fruitoftheshed |
||||
CircuitGizmos Guru Joined: 08/09/2011 Location: United StatesPosts: 1427 |
I made a little program that is a list: http://www.thebackshed.com/forum/forum_posts.asp?TID=10877 Micromites and Maximites! - Beginning Maximite |
||||
Quazee137 Guru Joined: 07/08/2016 Location: United StatesPosts: 600 |
I just my little bit too http://www.thebackshed.com/forum/forum_posts.asp?TID=10877&PN=1#135534 |
||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |
