Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 18:50 14 Nov 2025 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : CMM2 prototype Case

Author Message
PeteCotton

Guru

Joined: 13/08/2020
Location: Canada
Posts: 576
Posted: 09:21pm 27 Aug 2020
Copy link to clipboard 
Print this post

I wasn't happy with my brand new CMM2 sitting bare on my bench alongside a lot of other metal junk on my desk. So I hastely printed out a label and put together a prototype case (the front panel is just thick cardboard covered with a printed surface). When I get comfortable with how I am using the CMM2 I will decided on what I/O goes where and either cut or 3d print permanent front and back panels.

For the time being it just has the power switch exposed at the front.

Yes, I know it's an ignition key switch.... but is there a better way to turn this amazing bit of hardware on or off? I think not! :-)

I also dug out an old 1600x1200 (aka 800x600) monitor that I bought back in 2004, but couldn't bear to part with (mainly because it cost me an arm and a leg back then).

As the case evolves I will add more pictures. But for the time being, I'm going to play with the programming side (now that I'm not worried about it shorting out on the junk on my desk).
 
CircuitGizmos

Guru

Joined: 08/09/2011
Location: United States
Posts: 1427
Posted: 09:58pm 27 Aug 2020
Copy link to clipboard 
Print this post

Beautiful!!
Micromites and Maximites! - Beginning Maximite
 
darthvader
Regular Member

Joined: 31/01/2020
Location: France
Posts: 95
Posted: 10:20pm 27 Aug 2020
Copy link to clipboard 
Print this post

Lol  
That's original !!
Well done  
Theory is when we know everything but nothing work ...
Practice is when everything work but no one know why ;)
 
PeteCotton

Guru

Joined: 13/08/2020
Location: Canada
Posts: 576
Posted: 10:39pm 27 Aug 2020
Copy link to clipboard 
Print this post

Thanks. My earliest computer obsession came from electronics magazines that my dad used to buy in the 70's, and they all had these homebrew cases (like the Altair 8800's). I think that thought has been nestling in the back of my brain since then.
 
darthvader
Regular Member

Joined: 31/01/2020
Location: France
Posts: 95
Posted: 11:47pm 30 Aug 2020
Copy link to clipboard 
Print this post

Hi , i just finish my CMM2 case , here are some pics ...
Next step , like you will see on CAD , it's to build a USB keyboard and print it  













Cheers.
Theory is when we know everything but nothing work ...
Practice is when everything work but no one know why ;)
 
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2025