TheBackShed.com

Forum Index : Microcontroller and PC projects : What ever happened with the MauroXavier XDEOM source?

Author

Message

mclout999

Guru

Joined: 05/07/2020
Location: United States
Posts: 492

Posted: 05:43pm 06 Oct 2020

Copy link to clipboard

Print this post

I was on YouTube and the old 8bit guy video popped up in my suggestions and I watch it as it was why I got involved with this wonderful project. I once again marveled at the Demo by MauroXavier and was wondering if it ever was posted anywhere? Does anyone have a link to it. I would love to see how he did the magic. I found MauroXavier YouTube video and it says at the bottom source to come soon. Did I miss that somehow?

They call me Shai-Hulud (The maker)

MauroXavier
Guru

Joined: 06/03/2016
Location: Brazil
Posts: 303

Posted: 07:22pm 06 Oct 2020

Copy link to clipboard

Print this post

No, you didn't miss anything.

Unfortunately, I'm very busy now, but to publish de source code I must fix somethings thas were broken by a firmware optimization because the speed was increased and the frame limiter that should work, doesn't work well. I must fix this for the users that use the CMM2 with 480 Mhz too.

If I upload this "as is", for sure many users will report bugs.

I'm finishing it to upload to the GitHub. I will try to release it soon as possible.

Sorry for the delay.

mclout999

Guru

Joined: 05/07/2020
Location: United States
Posts: 492

Posted: 08:49pm 06 Oct 2020

Copy link to clipboard

Print this post

MauroXavier said No, you didn't miss anything.

Unfortunately, I'm very busy now, but to publish de source code I must fix somethings thas were broken by a firmware optimization because the speed was increased and the frame limiter that should work, doesn't work well. I must fix this for the users that use the CMM2 with 480 Mhz too.

If I upload this "as is", for sure many users will report bugs.

I'm finishing it to upload to the GitHub. I will try to release it soon as possible.

Sorry for the delay.

Thanks for the prompt response. That makes sense with the nature of the rapid changes and updates that are happening on an almost dayly bases. These guys are amazing prodigious and incredibly responsive to the community. I look forward to seeing behind the curtain on you wonderful demo.

They call me Shai-Hulud (The maker)

MauroXavier
Guru

Joined: 06/03/2016
Location: Brazil
Posts: 303

Posted: 04:42pm 12 Oct 2020

Copy link to clipboard

Print this post

As I promised:

https://github.com/mauroxavierneto/demox_cmm2

mclout999

Guru

Joined: 05/07/2020
Location: United States
Posts: 492

Posted: 06:38pm 12 Oct 2020

Copy link to clipboard

Print this post

Thank you so very much. Will love just running it but seeing the magic under the hood is going to be EDUCATIONAL to say the least, if I can grasp it.

They call me Shai-Hulud (The maker)

MauroXavier
Guru

Joined: 06/03/2016
Location: Brazil
Posts: 303

Posted: 06:41pm 12 Oct 2020

Copy link to clipboard

Print this post

I hope you enjoy it and use the source code as you wish! If it is some way useful, then my objective was achieved.

mclout999

Guru

Joined: 05/07/2020
Location: United States
Posts: 492

Posted: 03:56am 13 Oct 2020

Copy link to clipboard

Print this post

MauroXavier said I hope you enjoy it and use the source code as you wish! If it is some way useful, then my objective was achieved.

Well it is also a magnificent piece of art. Now everyone can run it on their own rigs and be inspired by it. Just watching it on YouTube is not as good.

They call me Shai-Hulud (The maker)

Print this page

To reply to this topic, you need to log in.