 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Geoff's ASCII terminal, revisited
| Author | Message | ||||
| robert.rozee Guru  Joined: 31/12/2012 Location: New ZealandPosts: 2459 |
just happened upon the below while looking for something completely unrelated: https://github.com/petrohi/terminal (upgraded firmware with menu setup, 640x480, 60Hz VGA output) https://github.com/dhansel/TerminalUSB (added USB keyboard support via USB port) https://github.com/bkw777/Geoff_vt100 (looks like PCB only) https://github.com/legacypixels/terminal (largely same as petrohi's but more recent activity) the upgrade of the firmware to support USB keyboard directly looks interesting, this could be an open-source replacement to the commercial solution that the CMM2 mk2 has a socket for. note: i've not looked into any of the above in great detail. cheers, rob :-) Edited 2022-01-14 23:04 by robert.rozee |
||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |
