 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : LCD Module DEM16217
| Author | Message | ||||
| asknik2022 Regular Member  Joined: 26/03/2022 Location: United KingdomPosts: 94 |
Hi Does anyone know if it is possible to connect this LCD Panel to a Micromite or picomite? Spec Below DEM 16217 SYH-PY LCD dot matrix modules • dot matrix modules with 2 lines and 16 characters • high contrast LCD-STN display • LED backlight • characters: black • by Display Elektronik • interface for 4- or 8-Bit data bus |
||||
| matherp Guru  Joined: 11/12/2012 Location: United KingdomPosts: 10633 |
look for BITBANG LCD in the manual (special device support and the command list). Assuming the controller is standard then should work |
||||
Mixtel90 Guru Joined: 05/10/2019 Location: United KingdomPosts: 8305 |
Should be OK. There's a diagram in both the manuals showing how to do it. It's a generic LCD display, so look under "Special Device Support". It works in 4-bit mode. Mick Zilog Inside! nascom.info for Nascom & Gemini Preliminary MMBasic docs & my PCB designs |
||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |
